Explore

<p>In this section, you can explore the technical specifications, pictures, technique instructions, and ordering information.</p>


Visit Research & Discovery

Product Category - Implant Prosthetics

Attachments

Implant Prosthetics

Tools and Accessories

Keystone TiLobe 4.1mm Closed-Tray Transfer

Closed-Tray Transfers (aka indirect impression copings) are attached to an endosseous dental implant for a closed tray (indirect) impression technique.

Includes:

Closed-Tray Pin


Made of titanium for radiopacity. 

Keystone TiLobe 4.1mm Open-Tray Transfer

Open-Tray Transfers (aka direct impression copings) are attached to an endosseous dental implant for an open tray (direct) impression technique. The open tray technique is especially recommended when the implants are not sufficiently parallel to allow the impression to be easily withdrawn. 

Includes:

Guide Pin for use throughout the impression process
Open-Tray Screw for use only to affix the transfer to the appropriate implant analog


Made of titanium for radiopacity. 

Keystone TiLobe 3.5mm/4.1mm/5.0mm Closed-Tray Pin

Keystone TiLobe 4.1mm X 6mm Engaging Titanium Base

Engaging Titanium Base, made of titanium alloy, for single-unit restorations prepared in a laboratory. It may be used within either a digital or traditional workflow.  

Includes: 

2 Titanium Screws – 1 for laboratory use and 1 for definitive use 


Using a digital workflow? Download our latest library to begin designing. 

Keystone TiLobe 4.1mm X 4mm Healing Abutment (Wide)

Titanium Healing Abutments are intended to be temporarily connected to an endosseous dental implant to support the healing of the surrounding soft tissue for a single-stage surgical protocol. They are indicated for use for up to 180 days. The healing abutments are available in different height options so you can choose the appropriate height for occlusal clearance.  When attaching to the implant, hand tighten only.

Keystone TiLobe 4.1mm X 4mm Healing Abutment

Keystone TiLobe 4.1mm X 2mm Healing Abutment (Wide)

Keystone TiLobe 4.1mm X 2mm Healing Abutment

Keystone TiLobe 4.1mm Scan Body

Whether you are scanning intraorally or in the laboratory, the titanium scan body fits within your workflow and allows you to design the best possible restoration for the case. As part of our Preat Choice Library, it gives you access to 17 different options for fixture-level cases and 9 restorative solutions for multi-unit level cases.Titanium – Radiopaque to verify fit intraorallyMatte Finish – Easy scanning with no reflectionLaser Etched – Clearly identify the system and size plus easily match with the product description in the CAD softwareAsymmetrical Design – Only one way to align in CAD softwareDownload our latest library to begin designing.

Keystone TiLobe 4.1mm Titanium Base

Keystone TiLobe 4.1mm X 4.5mm Engaging Titanium Base

Keystone TiLobe 4.1mm X 4.5mm Non-Engaging Titanium Base

Non-Engaging Titanium Base, made of titanium alloy, for multi-unit restorations prepared in a laboratory. It may be used within either a digital or traditional workflow.  

Includes: 

2 Titanium Screws – 1 for laboratory use and 1 for definitive use 


Using a digital workflow? Download our latest library to begin designing. 

ASC Keystone TiLobe 4.1mm Titanium Base

Optimize the function and esthetic of restorations with an angled screw channel. The ASC Titanium Base allows you to adjust the screw channel from 0-30° to meet your case needs. Made of titanium alloy, the ASC Titanium Base is anodized a gold hue to further enhance esthetics.  Includes: 2 Titanium Screws – 1 for laboratory use and 1 for definitive use Download our latest 3shape or exocad library to begin designing.

ASC Keystone TiLobe 4.1mm Engaging Titanium Base

Optimize the function and esthetic of restorations with an angled screw channel. The ASC Titanium Base allows you to adjust the screw channel from 0-30° to meet your case needs. Made of titanium alloy, the ASC Titanium Base is anodized a gold hue to further enhance esthetics.  Includes: 2 Titanium Screws – 1 for laboratory use and 1 for definitive use Download our latest 3shape or exocad library to begin designing.  

ASC Keystone TiLobe 4.1mm Non-Engaging Titanium Base

ASC Keystone TiLobe 4.1mm X 9mm Engaging Titanium Base

ASC Keystone TiLobe 4.1mm X 9mm Non-Engaging Titanium Base

ASC Keystone TiLobe 3.5mm Titanium Base

ASC Keystone TiLobe 3.5mm Engaging Titanium Base

ASC Keystone TiLobe 3.5mm Non-Engaging Titanium Base

ASC Keystone TiLobe 3.5mm X 9mm Engaging Titanium Base

ASC Keystone TiLobe 3.5mm X 9mm Non-Engaging Titanium Base

Keystone TiLobe 4.1mm Analog

The Implant Analog, also known as a replica, is for use in stone models during the laboratory fabrication process. 

Keystone TiLobe 4.1mm Analog (10-Pack)

Keystone TiLobe 4.1mm Analog (25-Pack)

Keystone TiLobe 4.1mm Verification Cylinder

Non-Engaging Verification Cylinder, made of titanium alloy, for the fabrication of temporary, multiple-unit bridges. The lack of anti-rotational implant connection allows for a passive path of insertion.

Provisional restorations can be made chairside using any standard fabrication technique.



This product is not intended for applications exceeding 180 days during endosseous and gingival healing. The following conditions would contraindicate use:

Less than 4.0 mm abutment height

Use on implants placed in any orientation other than vertical. No post angle correction is allowed



Includes:

Guide Pin for use throughout the fabrication process
Titanium Screw to retain the finished provisional


Using a digital workflow? Download our latest library to begin designing. 

Keystone TiLobe 4.1mm Engaging Verification Cylinder

Engaging Verification Cylinder, made of titanium alloy, for the fabrication of single-unit, temporary screw-retained restorations. The engaging feature is designed to prevent rotation of the provisional crown. Provisional restorations can be made chairside using any standard fabrication technique.



This product is not intended for applications exceeding 180 days during endosseous and gingival healing. The following conditions would contraindicate use:

Less than 4.0 mm abutment height

Use on implants placed in any orientation other than vertical. No post angle correction is allowed



Includes:

Guide Pin for use throughout the fabrication process
Titanium Screw to retain the finished provisional




Using a digital workflow? Download our latest library to begin designing. 

Keystone TiLobe 4.1mm Engaging Verification Cylinder (10-Pack)

Keystone TiLobe 4.1mm Non-Engaging Verification Cylinder

Keystone TiLobe 4.1mm Non-Engaging Verification Cylinder (10-Pack)

Keystone TiLobe 4.1mm Digital Analog

Buy 1 Get 1 Free - All Digital Analogs 
Add one or more to your cart and the same amount of the same SKU will be added to your order! Buy as many as you'd like while supplies last! Bulk packs are Excluded from this offer 

The Digital Analog is comprised of a tapered analog body and security screw for a proper and secure fit within a digital model.  

Includes:  

1 security screw 


Download our latest library to begin designing 

Keystone TiLobe 3.5mm/4.1mm/5.0mm Guide Pin

Guide Pin for provisional applications, to attach prosthetic components to an implant analog captured in a working model during laboratory fabrication processes, or, after sterilization, to attach an Open Tray Transfer Coping to an endosseous dental implant during an open-tray (direct) impression procedure. 

ASC Keystone TiLobe 3.5mm/4.5mm/5.7mm Titanium Screw

The ASC Screw is for use with the ASC Titanium Base to enable an angled screw channel.  

Keystone TiLobe 3.5mm/4.1mm/5.0mm Titanium Screw

The Titanium Screw is generally used for the long-term retention of the definitive restoration in the oral environment. 

3i Certain 4.1mm Scan Body

ASC 3i Certain 4.1 Non-Engaging Titanium Base

ASC 3i Certain 4.1mm Engaging Titanium Base

ASC 3i Certain Screw

Buy BioHorizons®3.0mm Non-Engaging Titanium Base. We offer a unique portfolio of products and solutions that elevate the performance of your practice.

Digital Analog - Biomet 3i® Certain - Preat Corporation

Digital Analog - Biomet 3i® Certain

Buy BioHorizons®3.0mm Non-Engaging Verification Cylinder. We provide dental prosthetics and instruments for use in dental restorations.

Digital Analog - Biomet 3i® Certain - 3.4mm - Preat Corporation

Digital Analog - Biomet 3i® Certain - 3.4mm

Purchase BioHorizons®3.0mm Titanium Screw. We offer a wide range of only the highest quality parts, all competitively priced.

Digital Analog - Biomet 3i® Certain - 4.1mm - Preat Corporation

Digital Analog - Biomet 3i® Certain - 4.1mm

Buy BioHorizons®3.0mm 30° Multi-Unit Abutment x 4mm. We only carry the highest quality, safest products available.

Verification Cylinder - Biomet 3i® Certain - 4.1mm - Preat Corporation

Verification Cylinder - Biomet 3i® Certain - 4.1mm

Buy BioHorizons®3.0mm Closed-Tray Transfer. Affordability and quality merge in our products.

Verification Cylinder - Biomet 3i® Certain - 4.1mm - Engaging / 1-Each - Preat Corporation

Verification Cylinder - Biomet 3i® Certain - 4.1mm - Engaging / 1-Each

Purchase Clix Complete Ball Abutment BioHorizons®3.0mm x 2mm. We offer precision-engineered, yet affordable products.

Verification Cylinder - Biomet 3i® Certain - 4.1mm - Engaging / 10-Pack - Preat Corporation

Verification Cylinder - Biomet 3i® Certain - 4.1mm - Engaging / 10-Pack

Buy BioHorizons®3.0mm 17° Multi-Unit Abutment x 3mm. We carry affordable restorative dental products.

Verification Cylinder - Biomet 3i® Certain - 4.1mm - Non-Engaging / 1-Each - Preat Corporation

Verification Cylinder - Biomet 3i® Certain - 4.1mm - Non-Engaging / 1-Each

Purchase BioHorizons®3.0mm Straight Multi-Unit Abutment x 2mm. We carry the highest quality products available in restorative dentistry.